Common Production Process Of PET LF RFID Card

1. The PET LF RFID Card can be designed according to the materials provided by the customer, or the design draft can be provided by the customer.

2. The thickness of the card ranges from 0.30mm to 0.76mm, and can also be made into other thicknesses.

3. The standard size of card is 85.5mm X 54mm, rounded corners. It can also be made into other sizes.

4. The card can be printed on one or both sides, using silk or offset printing (CMYK four-color printing) printing method.

5. You can spray different numbers, PIN codes or text on each membership card.

6. Card can be added with signature strip or tablet (the area that can be written by hand).

7. Card can be added with low density or high density magnetic strip (three rail magnetic strip) according to customer requirements.

8. The Card can be used to make a convex code. The convex code can be hot stamped or hot silver.

9. You can make round holes or strip holes on the card.

10. You can apply a scratch strip on the card (usually used for recharge cards, telephone cards, lottery cards, etc.).

11. Membership cards can be labeled with various types of barcodes.

12. The number of the Bank Card CPU Card can be arranged in order, or you can make a personalized, irregular number.

13. Cards can be square, round and any other irregular shape.

14. The background color of the card can be made into gold or imitation silver.

15. You can burn gold or silver on the card.

16. The surface of the card can be made of matte or glossy, sub-surface effect.